|
MY-80A型万能钻头刃磨机
UNIVERSAL
DRILL GRINDER OPERATION MANUAL
說明書

一、概述:MY-80A型萬能鑽頭刃磨機是用來修磨鑽頭的專用設備。具有精確、高效、實用、耐久、等一系列优点。本機良好的剛性、精密的定位、合理的結構,使重磨鑽頭的幾何角度、表面精糙度都得到了可靠的保證。巧妙的設計使本機操作極爲簡單可靠,一用就會,完全排除了憑技術磨鑽頭的人爲因素。
據使用單位抽樣調查考證,使用本機後,公節約磨鑽頭的自身損耗及砂輪損耗,工時損耗和鑽頭耐用度的提高,按每天使用3~4小時計算,一個月就收回了買機的成本。如果考慮到磨好的標準鑽頭,可提高工效,減少廢品損失等因素,其經濟效益更不可估量。
由於本機結構緊湊、體積小、工作平穩,無雜訊,因而除作爲鑽頭刃磨專機外,還可以通過更換砂輪品種和修正砂輪形狀來用作其他刀具的刃磨或各種工藝品的成型磨削。
1.Descriptionin brief:
This drill grinder is a special equipment for resharpening drills.MY-80A
drill grinder, Which produced by our Co & Germany Co,wins praise
from customers for its smart, accurate, effective reliable, longlasting
and low-cost features.
The geometric forms and surface roughness of drill resharpened can be
guaranteed by high rigidity, accurate positioning and ratilnal structure
of this grinder.
Lt is very easy for an operator, even an unskilled,to get point of operation
by means of its magic design. According to Some users investigation
the cost to buy this machine can be paid off within one month by saving
3 or 4 working hrs a day through reducing waer of drill, grinding wheel,
etc… Taking into consideration of that a standard reground drill can
improve working speed and quality , its economic benefit will be greater
than above mentioned.
Apart from being a special drill grinder it can also be used for grinding
other cutters or crafts by changing kinds of grinding wheels or dressed
forms of grinding wheels.

1、 開關盒Change-over
switch;
2、 2和2a緊固螺釘2 & 2a,Fastening screws;
3、 砂輪Grinding Wheel;
4、 支架Prism rest;
5、 夾持體Holder;
6、 定位銷Positioning pin;
7、 壓緊手柄Handle for locking prism rest;
8、 支架滑座Slider for prism rest;
9、 進給手輪Adjusting screw;
10、緊固螺釘Fastening screw;
11、調節手輪Adjusting screw;
12、砂輪修正器Wheel dresser;
二、技術參數Technical
parameters;
鑽頭直徑Dia.lf drill tl be ground: 1--21mm
砂輪直徑Dia.lf grinding wheel: 125mm
電壓Power voltage: 220v
電機功率Motor power: 180W
轉數Wheel spindle sqeeds:2800r/min
整機重量 Weight 11.5KG |