WD165万能砂轮修整器适用於平面磨床、万能工具磨床上，
修整由直线和圆弧组成的各种截形砂轮。
Mode WD165 Universal Wheel Dresser Adaptable on surface
grinder and universal tool grinder for dressing grinding
wheels into various cross sections of flat or curved shapes.
中心高------------------------------------------165mm
测量准销直径---------------------------------Φ10mm
金钢刀摆动的最大距离--------------------±20mm
修整砂轮最大直径--------------------------Φ200mm
转盘刻度读数精度--------------------------5’
进给最大移动量-----------------------------20mm
推给手柄刻度每格--------------------------0.02mm
Main Parameters
Center height---------------------------------165mm
Measuring quasi-pin dia-------------------Φ10mm
Max.swing distance
of diamond cutter-----------------------------±20mm
Max.wheel diameter--------------------------Φ200mm
Reading accuracy of turret index---------5’
Max.translation of fee------------------------20mm
Feed per division of handle scale-------0.02mm
修整凸圆弧：H=L+R
修整凹圆弧：H=L-R
H-两准销外母线间的距离
R-所需修整圆弧之半径
L-金钢刀刀尖至基准板的距离
Calaculation formulars
To dress convex arc surface:H=L+R
To dress concave arc surface:H=L-R
H: distance between outer generating
lines of two locating pins.
R: Radius of the arc surface to be dressed
L: distance from tip of diaamond cutter to base plate